Genie error codes
Genie Z-30/20N, Z-34/22, Z-45/25 DC: Curtis motor controller
These are codes of the Curtis motor controller (two-digit), separate from the machine control codes; the manual lists them in the controller fault table. Below are 11 codes with the original message from the manufacturer's manual and its description. They apply to these machines: Genie Z-30/20N, Z-30/20N RJ, Z-34/22, Z-34/22N, Z-34/22 BE, Z-45/25 DC, Z-45/25J DC, Z-45/25 BE. Source: Genie Service Manual Z-30/20N, Z-34/22, Z-45/25 DC, Curtis controller code table.
The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.
All Genie codes: the list
| Code | Meaning | Type |
|---|---|---|
| COMMUNICATION ERROR | COMMUNICATION ERROR | blocking fault |
| 12 | HW FAILSAFE 1-2-3 | blocking fault |
| 13 | M- SHORTED / FIELD OPEN / ARM SENSOR / FLD SENSOR | blocking fault |
| 21 | THROTTLE FAULT 1 / THROTTLE FAULT 2 | blocking fault |
| 31 | CONT DRVR OC | blocking fault |
| 32 | MAIN CONT WELDED | blocking fault |
| 33 | PRECHARGE FAULT | blocking fault |
| 34 | MISSING CONTACTOR / MAIN CONT DNC | blocking fault |
| 41 | LOW BATTERY | blocking fault |
| 42 | OVERVOLTAGE | blocking fault |
| 43 | THERMAL CUTBACK | blocking fault |