609 609 105609 609 104

Kubota · Mini excavator

Kubota KX018-4

Mini excavator rental · digging depth 2.38 m

Digging depth
2.38m
Horizontal reach
3.92m
Width
1.3m
Weight
1,720kg

Renting the Kubota KX018-4 mini excavator gives you a digging depth of 2.38 m and a reach of 3.92 m with a weight of just 1,720 kg, making it a machine for excavations for utility connections and fence foundations and for groundwork on private properties. It stands out for its hydraulically extendable undercarriage: retracted to 0.99 m it fits through narrow passages, and extended to 1.30 m it provides stability when digging. We deliver it to Bydgoszcz, Toruń, Poznań and across Poland.

Kubota KX018-4, mini excavator for rentKubota
Working range
Kubota KX018-4: working range chart (reach and capacity)

Rental

Kubota KX018-4: from PLN 300 + VAT per day

The lowest rate applies to rentals of more than 14 days; for shorter rentals the daily rate is higher. We arrange delivery across Poland.

See the price list: rates for 1–3, 7 and 14 daysAsk about availability and price
wynajem@fajnepodnosniki.pl
4.9 on Google
Technical specifications

What are the specifications of the Kubota KX018-4?

Digging depth
2.38 m
Horizontal outreach
3.92 m
Unladen weight
1,720 kg
Power source
Diesel
Engine type
Diesel
Intended use
Outdoor
Standard bucket capacity (SAE / CECE)
0.041 / 0.035 m³
Max. digging height
3.45 m
Max. dump height
2.38 m
Max. digging depth
2.38 m
Max. vertical wall digging depth
1.94 m
Max. digging reach
3.92 m
Max. digging reach at ground level
3.86 m
Arm length (standard)
1.09 m
Max. digging force (arm)
8.3 kN (840 kgf)
Max. digging force (bucket)
15.9 kN (1,620 kgf)
Boom swing angle (left / right)
75° / 60°
Slew speed
9.1 rpm
Overall width (undercarriage retracted / extended)
0.99 / 1.30 m
Overall height (cab / canopy)
2.35 / 2.33 m
Dimensional drawing
Kubota KX018-4: dimensional drawing with labelled dimensions
Machine dimensions

What are the dimensions of the Kubota KX018-4?

Overall height (cab)
2.35 m
Transport length
3.71 m
Track length
1.59 m
Track wheel centres (idler to sprocket)
1.23 m
Blade distance from slew centre
1.08 m
Minimum front swing radius
1.48 m
Max. blade lift above ground
0.23 m
Max. blade drop below ground
0.23 m
Undercarriage / blade width (extended)
1.30 m
Undercarriage / blade width (retracted)
0.99 m
Upper structure width
0.99 m
Rear swing radius
1.07 m
Bucket side offset (boom swung right)
0.45 m
Bucket side offset (boom swung left)
0.51 m
About the machine

What is the Kubota KX018-4 used for?

The Kubota KX018-4 is a tracked mini excavator in the lightest machine class, designed for groundwork where a larger excavator cannot get in: on private properties, in gardens, between buildings and on built-up plots. It digs trenches for cables, water supply and sewer pipes as well as excavations for foundations and posts, while the 0.23 m high dozer blade is used for backfilling and levelling ground.

Rubber tracks 230 mm wide and a ground pressure of 26.5 kPa minimise marks on lawns and block paving. The rear swing radius of the upper structure is 1.07 m, and the boom swings 75° to the left and 60° to the right, so you can dig along walls and fences without repositioning the machine. The cab protective structure meets ROPS (ISO 3471), TOPS and OPG Level 1 requirements.

When choosing, it is worth knowing that the standard bucket has a capacity of 0.041 m³ (SAE) and the bucket digging force reaches 15.9 kN. The three-cylinder Kubota D902 diesel engine, rated at 11.8 kW (16 hp), meets the Stage V standard and can run on HVO fuel. Unlike mini excavators with a fixed-width undercarriage, the KX018-4 combines access through narrow gateways with stable operation at full reach.

  • Excavations for utility connections
  • Trenches for cables and drainage
  • Fence and patio foundations
  • Garden groundwork
  • Backfilling and levelling with the blade
  • Digging next to building walls
Rental at RK Rental

What does renting the Kubota KX018-4 include?

  • We arrange transportDelivery and collection of the machine: Bydgoszcz, Toruń, Poznań and all over Poland.
  • Inspected machineChecked before handover, with full documentation.
  • Mobile serviceRepair on site at the customer's location, on the construction site, in the hall or warehouse; if needed, a replacement machine from a fleet of over 250 machines.
RK Rental · fajnepodnosniki.pl · Brzoza near Bydgoszcz · wynajem@fajnepodnosniki.plTechnical data according to the manufacturer, indicative values · updated: · RK-W/KUBOTA-KX018-4

Kubota KX018-4: frequently asked questions

Will the Kubota KX018-4 fit through a 1 m wide passage?

Yes. With the undercarriage hydraulically retracted, the machine is 0.99 m wide, the same as the width of the upper structure. However, the margin is minimal, so it is worth measuring the clear width of the side gate or main gate before delivery; for work, the undercarriage extends to 1.30 m.

Will the Kubota KX018-4 damage a lawn or block paving?

The risk is low: the machine weighs 1,720 kg, runs on 230 mm wide rubber tracks and its ground pressure is 26.5 kPa (0.27 kgf/cm²). On delicate surfaces, avoid sharp turns on the spot.

Can the Kubota KX018-4 dig a trench right next to a building wall?

Yes. The boom swings 75° to the left and 60° to the right, which offsets the bucket sideways by 0.51 m to the left or 0.45 m to the right. With a rear swing radius of 1.07 m, you can dig along walls and fences without constantly repositioning the machine.

What is the digging depth of the Kubota KX018-4?

The digging depth of the Kubota KX018-4 is 2.38 m.

What is the horizontal reach of the Kubota KX018-4?

The horizontal reach of the Kubota KX018-4 is 3.92 m. This is the maximum digging reach, measured from the slewing axis of the upper structure.

Is the Kubota KX018-4 suitable for use inside a building?

The Kubota KX018-4 has diesel 16 hp (11.8 kW) drive, so it is intended for work outdoors and on rough ground. It is not suitable for enclosed spaces, because a diesel engine releases exhaust fumes where people breathe.

What are the dimensions of the Kubota KX018-4 and how much does it weigh?

The Kubota KX018-4 measures 3.71×1.3×2.35 m (L × W × H) and weighs 1,720 kg. These figures decide access to the work location: the width of the gate and route, the load-bearing capacity of the floor or ground, and the means of transport.

What qualifications do I need to operate the Kubota KX018-4?

Operating an excavator requires a Polish earthmoving machinery operator qualification (single-bucket excavators); this is not a UDT certificate. If you do not have a qualified operator, ask about renting with an operator when you request a quote.

Do you deliver the Kubota KX018-4 to the work site?

Yes, we arrange transport and deliver machines across Poland, from our base in Brzoza near Bydgoszcz, most often around Bydgoszcz, Toruń and Poznań. The machine arrives on site after inspection.

How much does it cost to rent the Kubota KX018-4?

Renting the Kubota KX018-4 (the 1.7 t class) costs from PLN 300 + VAT per day. A day costs PLN 500 for a rental of 1–3 days, PLN 450 up to 7 days, PLN 380 up to 14 days and PLN 300 over 14 days. Rates are net per day, excluding transport (transport is quoted separately, from PLN 250 net). The lowest rate applies to rentals of more than 14 days. We confirm the final price when you book, because it depends on the model, the rental period and the delivery location.

Contact

The fastest way is by phone: rental +48 609 609 105 or +48 609 609 104 (also WhatsApp), or write to wynajem@fajnepodnosniki.pl.

Phone (rental):
+48 609 609 105 or +48 609 609 104
E-mail:
wynajem@fajnepodnosniki.pl
WhatsApp:
+48 609 609 105
Base and office:
ul. Brzozowa 12, 86-061 Brzoza near Bydgoszcz, Poland
Office hours:
Monday to Friday, 7:30–15:30 (Polish time)
Response time:
Phone: straight away. Messages: a reply within 1 hour.