Haulotte Star vertical mast lifts (Star 6, Star 8S, Star 10, Star 13, Star 20, Star 26J)
Haulotte error code F08.04 — Supply
Message on the display: Supply
Code F08.04 occurs in machines: Haulotte STAR 6, STAR 6 C, STAR 6P, STAR 8S, STAR 10, STAR 13, STAR 13P, STAR 20, STAR 26J.
blocking fault
[case 1] Zapi failure code 18 on COMBIACX : Power capacitors voltage does not increase at start-up [case 2] Zapi failure code 27 on COMBIACX : The controller detects an overvoltage or under voltage condition : Overvoltage threshold is 35 V, under voltage threshold is 9.5 V [case 4] Zapi failure code 36 on COMBIACX : At start-up, the battery voltage is too low or too high (< 0.8 Vbatt or > 1.2 Vbatt) [case 8] Zapi failure code 60 on COMBIACX : A low logic level of Key-Off has been detected during start-up diagnosis [case 16] Zapi failure code 18 on ACEX : Power capacitors voltage does not increase at start-up [case 32] Zapi failure code 27 on ACEX : The controller detects an overvoltage or under voltage condition Overvoltage threshold is 35 V, under voltage threshold is 9.5 V [case 64] Zapi failure code 36 on ACEX : At start-up, the battery voltage is too low or too high (< 0.8 Vbatt or > 1.2 Vbatt) [case 128] Zapi failure code 60 on ACEX : A low logic level of Key-Off has been detected during start-up diagnosis
Description from the Haulotte service manual, in the original wording.
Possible causes
The manual does not list the causes for this code: the service technician establishes them during diagnosis of the machine.
What you can do
Switch the machine off with the emergency stop and switch it on again. If the code comes back, do not use the machine and call service.
What service does
A qualified service technician reads the code with the manufacturer's diagnostic tools, finds the cause, clears the code and carries out a function test.
Source: Haulotte Maintenance Book Star (4000712550, 4001033900, 4001122480, 4001180330, 4001198400), fault codes chapter.
The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.
Does code F08.04 not go away?
RK Rental services Haulotte lifts at our workshop or on site at the customer's premises (construction site, factory, warehouse). We read the code, remove the cause and select the parts by serial number.
Haulotte service · Haulotte parts · All Haulotte codes of this system