Haulotte: Activ'Screen (HA/HT RTJ, PRO) and ZAPI controllers (Compact, Optimum)
Haulotte error code F06.07 — Weighing sensors2 CFG[LoadManagementSytem] = VibratingWires
Message on the display: Weighing sensors2 CFG[LoadManagementSytem] = VibratingWires
warning / function limited
b0 Weighing system memory erroneous • Electronic card failure 1. Replace weighing unit N b1 Dynamic correction out of service • Accelerometer failure Weighing active without this correction 1. Replace weighing unit D b2 Information received from the weighing system not refreshed • CAN bus connection • Card failure 1. Check weighing system unit connection (CAN bus) 2. Check harness state 3. Replace weighing unit A b3 Low temperature threshold reached • Ambient temperature too low • Temperature sensor failure 1. Return to proper temperature conditions 2. Replace weighing unit b4 High temperature threshold reached • Ambient temperature too high • Temperature sensor failure 1. Return to proper temperature conditions 2. Replace weighing unit b5 Temperature information incoherent • Temperature sensor failure 1. Replace weighing unit N b6 - b7 - D b8 Weighing system not responding • Bad battery
Description from the Haulotte service manual, in the original wording.
Possible causes
The manual does not list the causes for this code: the service technician establishes them during diagnosis of the machine.
What you can do
Switch the machine off with the emergency stop and switch it on again. If the code comes back, do not use the machine and call service.
What service does
A qualified service technician reads the code with the manufacturer's diagnostic tools, finds the cause, clears the code and carries out a function test.
Source: Haulotte Maintenance Book HA16 RTJ / RTJ O / RTJ PRO (4000865070) and Compact 8–14 (4001181580, ZAPI alarms).
The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.
Does code F06.07 not go away?
RK Rental services Haulotte lifts at our workshop or on site at the customer's premises (construction site, factory, warehouse). We read the code, remove the cause and select the parts by serial number.
Haulotte service · Haulotte parts · All Haulotte codes of this system