Zoomlion ZS series scissor lifts (ZS0407, ZS0607, ZS0608, ZS0808, ZS0812, ZS1012, ZS1212, ZS1414)
Zoomlion error code P3 — Right Motor Temp High
Message on the display: Right Motor Temp High
Code P3 occurs in machines: Zoomlion ZS0508C, ZS0610C, ZS0612C, ZS1216C.
blocking fault
The Zoomlion display shows code P3 with the message “Right Motor Temp High”. It is a blocking fault or a safety-related code: do not use the machine until the cause has been found and removed.
Effect on the machine: Disable All Motion
Possible causes
The manual does not list the causes for this code: the service technician establishes them during diagnosis of the machine.
What you can do
Switch the machine off with the emergency stop and switch it on again. If the code comes back, do not use the machine and call service.
Solution from the manual
Right Motor Temp overheating: Drive Motor may be overheating. Let the lift cool down. If that does not help, cycle power to reset the Motor controller. If the problem persists, check the wiring and if OK, try replacing the Motor Controller or Motor.
Source: Zoomlion Service and Maintenance Manual for scissor lifts, Polish edition (version C, March 2023), tables 3-1 and 3-2.
The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.
Does code P3 not go away?
RK Rental services Zoomlion lifts at our workshop or on site at the customer's premises (construction site, factory, warehouse). We read the code, remove the cause and select the parts by serial number.
Zoomlion service · Spare parts · All Zoomlion codes of this system