Genie error codes
Older Genie GS-3384 RT (before serial number GS8403-40213)
The two-digit code is shown on the LED display of the controller (ECM); the dot next to the digits is either steady or flashing, depending on the code. Note: the numbers mean something different than in the GS-2668/3268 RT and in newer GS-RT machines with a text display, so check the machine's serial number. Below are 30 codes with the original message from the manufacturer's manual and its description. They apply to these machines: Genie GS-3384 RT before serial number GS8403-40213. Source: Genie Service Manual GS-3384 (Part No. 82259), Fault Code Chart ‘before serial number GS8403-40213’.
- 01Internal ECM error.
- 02ECM/Platform communication error.
- 03Undefined platform DIP switch settings.
- 14Ground control function enable toggle switch closed at start up.
- 20Starting aid button fault at platform controls
- 21Engine start button fault at platform controls
- 22Left turn switch fault.
- 23Right turn switch fault.
- 26Platform up/down switch fault.
- 27Platform lift high speed enable fault.
- 28Platform lift low speed enable fault.
- 29Platform drive enable switch fault
- 30Joystick not centered on start up.
- 40Right turn coil (Y3) fault.
- 41Left turn coil (Y4) fault.
- 42Up coil (Y8) fault.
- 43Brake coil (Y2) fault.
- 44Down coil (Y7) fault.
- 45High speed bypass coil (Y49, Y49A) fault
- 47Function proportional coil (Y9) fault.
- 48Drive pump proportional coil (Y51) fault.
- 55Two speed coil (Y1) fault.
- 56Generator coil fault.
- 60LPG coil (Y50) fault.
- 61Diesel shut-off coil fault.
- 66Low oil pressure.
- 67High temperature
- 68Low ECM voltage.
- 69Low RPM
- 70High RPM
Showing the first 30: type more digits of the code.
The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.