Genie S-40 XC
Genie error code 82-21 — Overload — Recovery
Message on the display: Overload — Recovery
Code 82-21 occurs in machines: Genie S-40 XC.
warning / function limited
The Genie display shows code 82-21 with the message “Overload — Recovery”. It is a warning: some functions of the machine may be limited until the cause has been removed.
Effect on the machine: Advisory condition. Machine is fully functional.
Possible causes
- This is a flag that indicates that the platform was overloaded and that auxiliary function enable was used while overloaded.
What you can do
Switch the machine off with the emergency stop and switch it on again. If the code comes back, do not use the machine and call service.
Solution from the manual
* Power up the machine in service mode and clear the flag in the service menu on the ground control display.
Source: Genie Service and Repair Manual S-40 XC (Part No. 1322629, 1286829GT), Fault Codes section.
The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.
Does code 82-21 not go away?
RK Rental services Genie lifts at our workshop or on site at the customer's premises (construction site, factory, warehouse). We read the code, remove the cause and select the parts by serial number.
Genie service · Genie parts · All Genie codes of this system