Genie error codes

Genie S-40 XC

The code is made up of two numbers: the fault source and the fault type (e.g. 15-21), shown on the display of the machine's ground control box. Note: on the S-40 XC the same numbers can mean something different than on the larger XC models. Below are 135 codes with the original message from the manufacturer's manual and its description. They apply to these machines: Genie S-40 XC. Source: Genie Service and Repair Manual S-40 XC (Part No. 1322629, 1286829GT), Fault Codes section.

Brand

Machine type / control system

Error code

Showing the first 30: type more digits of the code.

The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.

All Genie codes: the list

Code	Meaning	Type
1-13	Engine Can Bus — Not detected	blocking fault
6-19	Key switch — Fault	blocking fault
7-21	Engine Warning — Fault	warning / function limited
8-21	Engine Stop — Fault	blocking fault
11-27	Engine Start Switch — Active at startup	blocking fault
12-13	Machine CAN Bus — Not detected	blocking fault
13-27	Jib Up/Down Switch — Active at startup	blocking fault
14-15	Alternator — Fault	warning / function limited
15-19	Foot Switch — Timeout	warning / function limited
15-27	Foot Switch — Active at startup	warning / function limited
15-28	Foot Switch — Timeout	warning / function limited
17-9	Aux Pump Coil — Shorted to GND	blocking fault
17-11	Aux Pump Coil — Shorted to supply voltage	blocking fault
19-27	Platform Aux Enable Switch — Active at startup	warning / function limited
21-8	Pri Boom Up / Down Joystick — Shorted to GND	blocking fault
21-11	Pri Boom Up / Down Joystick — Shorted to supply voltage	blocking fault
21-27	Pri Boom Up / Down Joystick — Active at startup	blocking fault
22-9	Pri Boom Up coil — Shorted to GND	blocking fault
22-11	Pri Boom Up coil — Shorted to supply voltage	blocking fault
24-13	Pri Boom Angle — Not detected	blocking fault
24-14	Pri Boom Angle — Cross check failed	blocking fault
24-17	Pri Boom Angle — Not calibrated	blocking fault
24-19	Pri Boom Angle — Value out of expected range	blocking fault
25-21	Cable tension — Fault	blocking fault
26-9	Pri Boom Ext Coil — Shorted to GND	blocking fault
26-11	Pri Boom Ext Coil — Shorted to supply voltage	blocking fault
27-9	Pri Boom Ret Coil — Shorted to GND	blocking fault
27-11	Pri Boom Ret Coil — Shorted to supply voltage	blocking fault
35-27	Ground Control Buttons — Active at startup	warning / function limited
36-9	Jib Up Coil — Shorted to GND	blocking fault
36-11	Jib Up Coil — Shorted to supply voltage	blocking fault
40-9	Jib Select Coil — Shorted to GND	blocking fault
40-11	Jib Select Coil — Shorted to supply voltage	blocking fault
41-9	Turntable Rotate Joystick — Shorted to GND	blocking fault
41-11	Turntable Rotate Joystick — Shorted to supply voltage	blocking fault
41-27	Turntable Rotate Joystick — Active at startup	blocking fault
42-9	Turntable Rotate CW Coil — Shorted to GND	blocking fault
42-11	Turntable Rotate CW Coil — Shorted to supply voltage	blocking fault
43-9	Turntable Rotate CCW Coil — Shorted to GND	blocking fault
43-11	Turntable Rotate CCW Coil — Shorted to supply voltage	blocking fault
44-27	Drive Enable Toggle Switch — Active at startup	warning / function limited
45-27	Platform Level Toggle Switch — Active at startup	warning / function limited
46-9	Platform Rotate CW Coil — Shorted to GND	blocking fault
46-11	Platform Rotate CW Coil — Shorted to supply voltage	blocking fault
47-9	Platform Rotate CCW Coil — Shorted to GND	blocking fault
47-11	Platform Rotate CCW Coil — Shorted to supply voltage	blocking fault
51-9	Drive Joystick — Shorted to GND	blocking fault
51-11	Drive Joystick — Shorted to supply voltage	blocking fault
51-27	Drive Joystick — Active at startup	blocking fault
52-9	Drive Forward Pump Coil — Shorted to GND	blocking fault
52-11	Drive Forward Pump Coil — Shorted to supply voltage	blocking fault
53-9	Drive Reverse Pump Coil — Shorted to GND	blocking fault
53-11	Drive Reverse Pump Coil — Shorted to supply voltage	blocking fault
54-9	Brake Release Coil — Shorted to GND	blocking fault
54-11	Brake Release Coil — Shorted to supply voltage	blocking fault
55-9	High Drive Speed Coil — Shorted to GND	blocking fault
55-11	High Drive Speed Coil — Shorted to supply voltage	blocking fault
56-13	Telematics Device — Not detected	message
61-9	Steer Joystick — Shorted to GND	blocking fault
61-11	Steer Joystick — Shorted to supply voltage	blocking fault
61-27	Steer Joystick — Active at startup	blocking fault
62-27	Prox Override Toggle Switch — Active at startup	warning / function limited
69-9	AC Generator Output — Shorted to GND	blocking fault
69-11	AC Generator Output — Shorted to supply voltage	blocking fault
71-9	TCON — Fault	blocking fault
72-14	Lift Guard Contact Alarm Switch — Cross check failed	blocking fault
72-21	Lift Guard Contact Alarm Switch — Fault	blocking fault
73-12	Engine Oil Pressure — Sensor value too high	blocking fault
73-24	Engine Oil Pressure — Too low	blocking fault
74-15	Engine Temperature — Sensor value too low	blocking fault
74-23	Engine Temperature — Too high	blocking fault
76-13	Platform Load Sensor — Not detected	blocking fault
76-14	Platform Load Sensor — Cross check failed	blocking fault
76-15	Platform Load Sensor — Value to low	blocking fault
76-17	Platform Load Sensor — Not calibrated	blocking fault
76-21	Platform Load Sensor — Fault	blocking fault
78-13	Platform Controller (PCON) — Not detected	blocking fault
78-29	Platform Controller (PCON) — Software version mismatch	blocking fault
78-36	Platform Controller (PCON) — Not detected	blocking fault
79-13	Display Controller (DISCON) — Not detected	blocking fault
79-29	Display Controller (DISCON) — Software version mismatch	blocking fault
80-13	Turntable Controller (TCON) — Not detected	blocking fault
80-29	Turntable Controller (TCON) — Software version mismatch	blocking fault
82-21	Overload — Recovery	warning / function limited
83-21	Disabled — By owner	blocking fault
84-13	Chassis Angle — Not detected	blocking fault
84-17	Chassis Angle — Not calibrated	blocking fault
84-21	Chassis Angle — Turntable Tilt Sensor Internal Error.	blocking fault
88-9	Function Enable Coil — Shorted to GND	blocking fault
88-11	Function Enable Coil — Shorted to supply voltage	blocking fault
89-12	Fuel Level Sensor — Sensor value too high	message
89-15	Fuel Level Sensor — Sensor value too low	message
92-9	Turntable Rotate Flow Coil — Shorted to GND	blocking fault
92-11	Turntable Rotate Flow Coil — Shorted to supply voltage	blocking fault
94-13	Primary Boom Length — Not detected	blocking fault
94-14	Primary Boom Length — Cross check failed	blocking fault
94-17	Primary Boom Length — Not calibrated	blocking fault
94-19	Primary Boom Length — Value out of expected range	blocking fault
95-13	Engine RPM — Not detected	blocking fault
98-10	Platform Level Angle — Envelope exceeded	blocking fault
98-13	Platform Level Angle — Not detected	blocking fault
98-14	Platform Level Angle — Cross check failed	blocking fault
98-17	Platform Level Angle — Not calibrated	warning / function limited
98-19	Platform Level Angle — Value out of expected range	blocking fault
99-9	Primary Boom Extend / Retract Flow Coil — Shorted to GND	blocking fault
99-11	Primary Boom Extend / Retract Flow Coil — Shorted to supply voltage	blocking fault
100-9	Platform Level Up Coil — Shorted to GND	blocking fault
100-11	Platform Level Up Coil — Shorted to supply voltage	blocking fault
101-9	Platform Level Down Coil — Shorted to GND	blocking fault
101-11	Platform Level Down Coil — Shorted to supply voltage	blocking fault
110-27	Platform Rotate Toggle Switch — Active at startup	warning / function limited
116-13	Model Configuration — Not detected	blocking fault
116-31	Model Configuration — Setup invalid	blocking fault
140-10	Boom — Safety Envelope Exceeded	blocking fault
150-9	Sensor Power P26PWR — Shorted to GND	blocking fault
150-11	Sensor Power P26PWR — Shorted to supply voltage	blocking fault
152-9	Primary Boom Up/Down Flow Coil — Shorted to GND	blocking fault
152-11	Primary Boom Up/Down Flow Coil — Shorted to supply voltage	blocking fault
160-9	LF Steer Coil — Shorted to GND	blocking fault
160-11	LF Steer Coil — Shorted to supply voltage	blocking fault
161-9	RF Steer Coil — Shorted to GND	blocking fault
161-11	RF Steer Coil — Shorted to supply voltage	blocking fault
179-9	Platform Recirculation Coil — Shorted to GND	message
179-11	Platform Recirculation Coil — Shorted to supply voltage	message
185-9	ESTOP Source — Shorted to GND	blocking fault
185-11	ESTOP Source — Shorted to supply voltage	blocking fault
186-9	ESTOP Return — Shorted to GND	blocking fault
186-11	ESTOP Return — Shorted to supply voltage	blocking fault
206-13	TCON / PCON — TCON Bank Power Not Detected PCON Bank Power Not Detected	blocking fault
240-9	Turntable Sensor Power — P85PWR Short to B-	blocking fault
240-11	Turntable Sensor Power — P85PWR Short to B+	blocking fault
241-9	Turntable Sensor Power — P109PWR is shorted to B-	blocking fault
241-11	Turntable Sensor Power — P109PWR is shorted to B+	blocking fault
263-9	Platform Level Loop Coil — Shorted to GND	message
263-11	Platform Level Loop Coil — Shorted to supply voltage	message