Genie S-85 XC FE and S-85 XC E (hybrid and electric drive)
Genie error code 260-20 — Left Rear Drive Controller Temperature — Warning
Message on the display: Left Rear Drive Controller Temperature — Warning
Code 260-20 occurs in machines: Genie S-85 XC FE, S-85 XC E.
warning / function limited
The Genie display shows code 260-20 with the message “Left Rear Drive Controller Temperature — Warning”. It is a warning: some functions of the machine may be limited until the cause has been removed.
Effect on the machine: Limited Speed Drive
Possible causes
- Motor Controller Temperature exceeded or is below the warning temperature limit
What you can do
Switch the machine off with the emergency stop and switch it on again. If the code comes back, do not use the machine and call service.
Solution from the manual
*Allow the motor controller to cool down. *Move unit to a warmer location
Source: Genie Service and Repair Manual S-85 XC FE / E (Part No. 1337498), Fault Codes section.
The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.
Does code 260-20 not go away?
RK Rental services Genie lifts at our workshop or on site at the customer's premises (construction site, factory, warehouse). We read the code, remove the cause and select the parts by serial number.
Genie service · Genie parts · All Genie codes of this system
Neighbouring Genie codes
- 259-20Right Rear Drive Controller Temperature — Warning
- 259-23Right Rear Drive Controller Temperature — Too High
- 259-24Right Rear Drive Controller Temperature — Too Low
- 260-23Left Rear Drive Controller Temperature — Too High
- 260-24Left Rear Drive Controller Temperature — Too Low
- 261-20Right Front Drive Controller Temperature — Warning