609 609 105609 609 104

Genie XC, HF and J boom lifts (S-60 XC, S-80 XC, S-85 XC, S-80 HF, S-85 HF, S-60 J, S-80 J)

Genie error code 51-12 — Drive Forward / Reverse Joystick — Joystick voltage too high.

Message on the display: Drive Forward / Reverse Joystick — Joystick voltage too high.

Code 51-12 occurs in machines: Genie S-60 XC, S-80 XC, S-85 XC, S-80 HF, S-85 HF.

blocking fault

The Genie display shows code 51-12 with the message “Drive Forward / Reverse Joystick — Joystick voltage too high”. It is a blocking fault or a safety-related code: do not use the machine until the cause has been found and removed.

Effect on the machine: Drive Forward and Reverse functions will not operate.

Possible causes

  • Circuit C160DRV is above 4.5 V.

What you can do

Switch the machine off with the emergency stop and switch it on again. If the code comes back, do not use the machine and call service.

Solution from the manual

* Leave joystick in neutral position and cycle power. * If fault persists, with a voltmeter check that C160DRV (WH/RD, PCON J18-10) is at 2. 5V +/- 0.2 V at startup and does not

Source: Genie Service and Repair Manuals (Part No. 1316494, 1315679, 1288652, 1280490, 1285305, 1285307), Fault Codes section.

The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.

Does code 51-12 not go away?

RK Rental services Genie lifts at our workshop or on site at the customer's premises (construction site, factory, warehouse). We read the code, remove the cause and select the parts by serial number.

Book a service

Genie service · Genie parts · All Genie codes of this system

Neighbouring Genie codes