Older Genie GS-2668 RT and GS-3268 RT (before serial number GS6803-42382)
Genie error code 45 — No power output from ECM to the right front and left rear drive reverse valve coil OR ECM does not sense the right front and left rear drive reverse valve coil.
Message on the display: No power output from ECM to the right front and left rear drive reverse valve coil OR ECM does not sense the right front and left rear drive reverse valve coil.
Code 45 occurs in machines: Genie GS-2668 RT, GS-3268 RT.
blocking fault
The Genie display shows code 45 with the message “No power output from ECM to the right front and left rear drive reverse valve coil OR ECM does not sense the right front and left rear drive reverse valve coil”. It is a blocking fault or a safety-related code: do not use the machine until the cause has been found and removed.
Effect on the machine: Machine will not drive in reverse.
Possible causes
- No power output from ECM to right front and left rear drive reverse valve coil (schematic item A).
- bad valve coil.
What you can do
Switch the machine off with the emergency stop and switch it on again. If the code comes back, do not use the machine and call service.
Solution from the manual
Check wiring and terminals to right front and left rear drive reverse valve coil OR check the wiring and terminal at the ECM OR replace the valve coil.
Source: Genie Service Manual GS-2668 RT / GS-3268 RT (Part No. 52302), Fault Code Chart ‘before serial number GS6803-42382’.
The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.
Does code 45 not go away?
RK Rental services Genie lifts at our workshop or on site at the customer's premises (construction site, factory, warehouse). We read the code, remove the cause and select the parts by serial number.
Genie service · Genie parts · All Genie codes of this system
Neighbouring Genie codes
- 42No power output from ECM to the platform up valve coil OR ECM does not sense the platform up valve coil.
- 43No power output from ECM to the brake valve coil OR ECM does not sense the brake valve coil.
- 44No power output from ECM to the right front and left rear drive forward valve coil OR ECM does not sense the right front and left rear drive forward valve coil.
- 46No power output from ECM to the left front and right rear drive forward valve coil OR ECM does not sense the left front and right rear drive forward valve coil.
- 47No power output from ECM to the left front and right rear drive reverse valve coil OR ECM does not sense the left front and right rear drive reverse valve coil.
- 48No power output from ECM to the platform down valve coil OR ECM does not sense the platform down valve coil.