Genie S-85 XC FE and S-85 XC E (hybrid and electric drive)
Genie error code 130-23 — Battery current — Too high
Message on the display: Battery current — Too high
Code 130-23 occurs in machines: Genie S-85 XC FE, S-85 XC E.
blocking fault
The Genie display shows code 130-23 with the message “Battery current — Too high”. It is a blocking fault or a safety-related code: do not use the machine until the cause has been found and removed.
Effect on the machine: Machine disabled. Battery contactor open.
Possible causes
- Battery Voltage too high.
What you can do
Switch the machine off with the emergency stop and switch it on again. If the code comes back, do not use the machine and call service.
Solution from the manual
* Check power and ground cables. * Check battery state of charge, temperature and state of health.
Source: Genie Service and Repair Manual S-85 XC FE / E (Part No. 1337498), Fault Codes section.
The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.
Does code 130-23 not go away?
RK Rental services Genie lifts at our workshop or on site at the customer's premises (construction site, factory, warehouse). We read the code, remove the cause and select the parts by serial number.
Genie service · Genie parts · All Genie codes of this system