Genie S-85 XC FE and S-85 XC E (hybrid and electric drive)
Genie error code 95-23 — Engine RPM — Too high
Message on the display: Engine RPM — Too high
Code 95-23 occurs in machines: Genie S-85 XC FE, S-85 XC E.
warning / function limited
The Genie display shows code 95-23 with the message “Engine RPM — Too high”. It is a warning: some functions of the machine may be limited until the cause has been removed.
Effect on the machine: Hybrid mode disabled
Possible causes
- Engine speed >2350 rpm for 15 seconds
What you can do
Switch the machine off with the emergency stop and switch it on again. If the code comes back, do not use the machine and call service.
Solution from the manual
* Check high rpm solenoid. * Check rpm setting. Low rpm - 2150 / 208Hz High rpm - 3000 / 290 Hz
Source: Genie Service and Repair Manual S-85 XC FE / E (Part No. 1337498), Fault Codes section.
The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.
Does code 95-23 not go away?
RK Rental services Genie lifts at our workshop or on site at the customer's premises (construction site, factory, warehouse). We read the code, remove the cause and select the parts by serial number.
Genie service · Genie parts · All Genie codes of this system