Haulotte · Telescopic boom lift
Haulotte H43 TPX
Telescopic boom lift rental · working height 42.2 m · capacity 230 kg · 4×4 drive
- Working height
- 42.2m
- Capacity
- 230kg
- Horizontal outreach
- 20m
- Width
- 2.53m
- Weight
- 20,600kg
Renting the Haulotte H43 TPX diesel telescopic boom lift gives you a working height of 42.2 m with a horizontal outreach of 20 m and a basket capacity of 230 kg: equipment for work on the façades of tall buildings, steel structures and bridges. It stands out for its jib, which rotates through 140° vertically and 150° horizontally, and for its extendable axles, which widen the chassis from 2.53 to 3.3 m. We deliver the machine to Bydgoszcz, Toruń, Poznań and across Poland.
Haulotte
Rental
Haulotte H43 TPX: from PLN 600 + VAT per day
The lowest rate applies to rentals of more than 14 days; for shorter rentals the daily rate is higher. We arrange delivery across Poland.
See the price list: rates for 1–3, 7 and 14 daysAsk about availability and price Buy the rented machine: will it prove itself on the job? You can buy it from us, with the possibility of deducting part of the rental costs from the price of the machine.What are the specifications of the Haulotte H43 TPX?
- Working height
- 42.2 m
- Platform height
- 40.2 m
- Capacity
- 230 kg
- Horizontal outreach
- 20 m
- Unladen weight
- 20,600 kg
- Power source
- Diesel
- Engine type
- Diesel
- Drive
- 4WD
- Tyres
- Rough terrain
- Intended use
- Outdoor
- Max. horizontal outreach
- 20 m
- Platform occupants
- 2 (at 230 kg) / 3 (at 450 kg)
- Stowed length (transport)
- 14.5 m
- Length in stowed position
- 12.3 m
- Width with axles extended
- 3.3 m
- Wheelbase
- 3.5 m
- Ground clearance
- 38 cm
- Turntable rotation
- 360°
- Tail swing
- 1.58 m
- Main boom working angle
- 73° (0 / +73°)
What are the dimensions of the Haulotte H43 TPX?
- ALength in stowed position (platform folded)
- 12.30 m
- BOverall width (axles retracted)
- 2.53 m
- CStowed height
- 3.05 m
- DWheelbase
- 3.50 m
- EGround clearance
- 0.38 m
- FPlatform length
- 2.44 m
- GPlatform width
- 0.80 m
- HOverall length (stowed, platform unfolded)
- 14.50 m
What is the Haulotte H43 TPX used for?
The Haulotte H43 TPX is a large aerial work platform for jobs where a typical construction cherry picker cannot reach the target. The 0.8 × 2.44 m platform rises to 40.2 m, and the horizontal outreach reaches 20 m. The turret rotates through a full 360°, the jib works through a ±70° range and the platform itself rotates through ±90°, so the operator can approach a cornice, a girder or a roof structure without repositioning the chassis.
4×4 drive, rough terrain tyres, an oscillating axle with a differential lock and 40% gradeability let it reach the work position across an unpaved construction site. The diesel engine (55.5 kW in the European version) emits exhaust fumes, so this aerial work platform is intended primarily for work in the open air. When planning, you must take into account its weight of 20,600 kg (for the load-bearing capacity of the ground, floor slabs and ramps) and the 1.58 m tail swing when the turret rotates.
When choosing, bear in mind that the permissible wind speed is 45 km/h and the machine's tilt during work must not exceed 4°, so the weather and ground preparation have a real impact on the schedule. Compared with smaller articulating cherry pickers, the H43 TPX offers much greater reach but requires more space and low-loader transport: the transport length is 14.5 m and the stowed height 3.05 m.
- Façade maintenance on tall buildings
- Steel structures of tall industrial buildings
- Bridge and viaduct inspections
- Work on chimneys and silos
- Installing large-format advertising
- Roof work with a long outreach
What does renting the Haulotte H43 TPX include?
- We arrange transportDelivery and collection of the machine: Bydgoszcz, Toruń, Poznań and all over Poland.
- Current UDT inspectionThe machine arrives after inspection, with a valid UDT inspection (UDT is the Polish Office of Technical Inspection) and full documentation.
- Mobile serviceRepair on site at the customer's location, on the construction site, in the hall or warehouse; if needed, a replacement machine from a fleet of over 250 machines.
