Genie S-85 XC FE and S-85 XC E (hybrid and electric drive)
Genie error code 135-28 — Wall powered charger — Charge timeout
Message on the display: Wall powered charger — Charge timeout
Code 135-28 occurs in machines: Genie S-85 XC FE, S-85 XC E.
warning / function limited
The Genie display shows code 135-28 with the message “Wall powered charger — Charge timeout”. It is a warning: some functions of the machine may be limited until the cause has been removed.
Effect on the machine: Battery does not fully charge
Possible causes
- Charge Timeout caused by battery pack not reaching required voltage within safe time limit. Possible causes: Charger output reduced due to high temperatures. Poor battery health. Very deeply discharged battery. Poorly connected battery. Extra loads.
What you can do
Switch the machine off with the emergency stop and switch it on again. If the code comes back, do not use the machine and call service.
Solution from the manual
* Operate at lower ambient temperature. * Replace battery pack. * Check DC connections. (This error will automatically clear once the charger is reset by cycling DC)
Source: Genie Service and Repair Manual S-85 XC FE / E (Part No. 1337498), Fault Codes section.
The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.
Does code 135-28 not go away?
RK Rental services Genie lifts at our workshop or on site at the customer's premises (construction site, factory, warehouse). We read the code, remove the cause and select the parts by serial number.
Genie service · Genie parts · All Genie codes of this system