609 609 105609 609 104

Genie · Electric articulating boom lift

Genie Z-33/18

Electric articulating boom lift rental · working height 12 m · capacity 200 kg

Working height
12m
Capacity
200kg
Horizontal outreach
5.57m
Width
1.5m
Weight
3,665kg

Renting the Genie Z-33/18 electric articulating boom lift gives you 12 m of working height, 5.57 m of horizontal outreach and 200 kg capacity at a weight of just 3,665 kg, the choice where the load-bearing capacity of a floor, floor slab or mezzanine matters. It stands out for a short 4.17 m chassis that makes manoeuvring in tight industrial buildings easier. We deliver this cherry picker with RK Rental transport to Bydgoszcz, Toruń, Poznań and anywhere in Poland.

Genie Z-33/18, electric articulating boom lift for rentGenie
Working range
Genie Z-33/18: working range chart (reach and capacity)

Rental

Genie Z-33/18: from PLN 200 + VAT per day

The lowest rate applies to rentals of more than 14 days; for shorter rentals the daily rate is higher. We arrange delivery across Poland.

See the price list: rates for 1–3, 7 and 14 daysAsk about availability and price
wynajem@fajnepodnosniki.pl
Buy the rented machine: will it prove itself on the job? You can buy it from us, with the possibility of deducting part of the rental costs from the price of the machine.
Technical specifications

What are the specifications of the Genie Z-33/18?

Working height
12 m
Platform height
10 m
Capacity
200 kg
Horizontal outreach
5.57 m
Unladen weight
3,665 kg
Power source
Electric
Drive
2WD
Tyres
Non-marking
Intended use
Indoor
Platform occupants
2
Horizontal outreach
5.57 m
Up-and-over height
4.28 m
Platform levelling
automatic (self-levelling)
Turntable rotation
400° (non-continuous)
Turning radius (inside / outside)
1.90 m / 3.07 m
Drive speed (machine stowed)
5.2 km/h
Drive speed (boom raised)
0.86 km/h (boom raised, not extended) / 0.23 km/h (extended)
Gradeability
30%
Permissible lateral slope (driving)
25%
Tilt sensor activation
2.5°–4.5° (front–rear) / 4.5° (side-to-side)
Dimensional drawing
Genie Z-33/18: dimensional drawing with labelled dimensions
Machine dimensions

What are the dimensions of the Genie Z-33/18?

APlatform length
0.76 m
BPlatform width
1.17 m
CStowed height (transport)
1.98 m
DStowed length (transport)
4.17 m
EOverall width
1.50 m
FWheelbase
1.90 m
GGround clearance (centre)
0.15 m
Rental at RK Rental

What does renting the Genie Z-33/18 include?

  • We arrange transportDelivery and collection of the machine: Bydgoszcz, Toruń, Poznań and all over Poland.
  • Current UDT inspectionThe machine arrives after inspection, with a valid UDT inspection (UDT is the Polish Office of Technical Inspection) and full documentation.
  • Mobile serviceRepair on site at the customer's location, on the construction site, in the hall or warehouse; if needed, a replacement machine from a fleet of over 250 machines.
About the machine

What is the Genie Z-33/18 used for?

The Genie Z-33/18 is a lightweight 12 m class aerial work platform. Its unladen weight of 3,665 kg is nearly half that of the Haulotte HA12 CJ+ (7,110 kg), which opens up access to sites that heavier articulating booms cannot enter: mezzanines, storeys with limited floor slab load capacity and floors in older buildings. Typical tasks are electrical installations, lighting, ventilation and maintenance work below the ceiling.

The machine is for indoor use: electric power produces no exhaust fumes, and non-marking tyres protect floors. In the stowed position it is 4.17 m long, 1.5 m wide and 1.98 m high. The short chassis makes it easier to turn just inside a gate and to manoeuvre between workstations, but its 1.5 m width rules out passing through ordinary doors, so a gate or a wide service passage is needed.

When choosing a machine, remember that low weight comes with shorter side reach: 5.57 m against 7 m on the Manitou 120 AETJ-C or 6.6 m on the Haulotte HA12 IP. The 0.76 × 1.17 m basket and 200 kg capacity are designed for an operator with tools. If ground load-bearing capacity and manoeuvrability are the priority, the Z-33/18 will be a better fit than heavier cherry pickers of similar height.

  • Work on mezzanines
  • Installations in older buildings
  • Lighting maintenance below ceilings
  • Ventilation installation in industrial buildings
  • Work in tight industrial buildings
RK Rental · fajnepodnosniki.pl · Brzoza near Bydgoszcz · wynajem@fajnepodnosniki.plTechnical data according to the manufacturer, indicative values · updated: · RK-W/GENIE-Z-33-18

12 m · similar machines

What can replace the Genie Z-33/18? Machines with similar specifications

Comparison of the Genie Z-33/18 with equivalent machines
ModelWorking heightCapacityOutreachWidthWeightPower source
Genie Z-33/18 · this sheet12 m200 kg5.57 m1.5 m3,665 kgElectric
Haulotte HA12 IP12 m230 kg6.6 m1.35 m5,945 kgElectric
Manitou 120 AETJ-C11.95 m200 kg7 m1.2 m6,660 kgElectric
Haulotte HA12 CJ+11.68 m230 kg7.22 m1.2 m7,110 kgElectric
Genie Z-34/22N12.52 m227 kg6.78 m1.47 m5,178 kgElectric

Genie Z-33/18: frequently asked questions

Can the Genie Z-33/18 be taken onto a floor slab or mezzanine?

Its unladen weight of 3,665 kg is significantly lower than that of many 12-metre electric articulating booms, which increases the number of structures on which the machine can work. Driving onto a structure must always be preceded by a load-bearing check by the building manager or a structural engineer.

What size of opening will the Genie Z-33/18 pass through?

In the stowed position the machine is 1.5 m wide and 1.98 m high, so it needs a gate or passage larger than these dimensions; standard doors are too narrow for it. The short 4.17 m chassis, on the other hand, makes it easier to turn immediately behind the gate.

How big is the Genie Z-33/18 basket?

The basket measures 0.76 × 1.17 m, and the permitted load is 200 kg including the operator, tools and materials.

What is the working height of the Genie Z-33/18?

The working height of the Genie Z-33/18 is 12 m. Working height is the platform height plus the reach of the person working on it (2 m is assumed), so a machine is chosen for the work location, not for your own height.

What is the capacity of the Genie Z-33/18?

The capacity of the Genie Z-33/18 is 200 kg. The figure includes the operator, tools and material taken onto the platform: everything that goes up counts towards the capacity.

What is the horizontal outreach of the Genie Z-33/18?

The horizontal outreach of the Genie Z-33/18 is 5.57 m. This is how far the machine reaches sideways from its chassis, that is, over an obstacle such as a stockpile, ditch, greenery, fence or parked car.

Is the Genie Z-33/18 suitable for use inside a building?

The Genie Z-33/18 has electric drive, so it is suitable for work indoors: no exhaust fumes and quiet operation. Before driving into a hall, check the load-bearing capacity of the floor and the width of gates and aisles.

What are the dimensions of the Genie Z-33/18 and how much does it weigh?

The Genie Z-33/18 measures 4.17×1.5×1.98 m (L × W × H) and weighs 3,665 kg. These figures decide access to the work location: the width of the gate and route, the load-bearing capacity of the floor or ground, and the means of transport.

Do I need a UDT licence to operate the Genie Z-33/18?

Yes. Operating a self-propelled mobile elevating work platform independently requires a UDT qualification certificate (UDT is the Polish Office of Technical Inspection). RK Rental runs its own training courses with an official examination. You can ask about renting with an operator when you request a quote; this is possible when one of our service technicians qualified as an operator is free on that date.

Do you deliver the Genie Z-33/18 to the work site?

Yes, we arrange transport and deliver machines across Poland, from our base in Brzoza near Bydgoszcz, most often around Bydgoszcz, Toruń and Poznań. The machine arrives on site after inspection, with a current UDT inspection.

Can I buy the Genie Z-33/18 after renting it?

Yes, this is our “Buy the rented machine” scheme. If the Genie Z-33/18 works well for you, you can buy the machine you rented, and part of the rental cost can be deducted from the purchase price. We agree the details in the quote.

How much does it cost to rent the Genie Z-33/18?

Renting the Genie Z-33/18 (the 12 m working height class) costs from PLN 200 + VAT per day. A day costs PLN 350–450 for a rental of 1–3 days, PLN 300 up to 7 days, PLN 230 up to 14 days and PLN 200 over 14 days. Rates are net per day, excluding transport (transport is quoted separately, from PLN 250 net). The lowest rate applies to rentals of more than 14 days. We confirm the final price when you book, because it depends on the model, the rental period and the delivery location.

Contact

The fastest way is by phone: rental +48 609 609 105 or +48 609 609 104 (also WhatsApp), or write to wynajem@fajnepodnosniki.pl.

Base and office:
ul. Brzozowa 12, 86-061 Brzoza near Bydgoszcz, Poland
Office hours:
Monday to Friday, 7:30–15:30 (Polish time)
Response time:
Phone: straight away. Messages: a reply within 1 hour.