609 609 105609 609 104

Genie S-85 XC FE/E, S-60 DC, Z-60 DC: drive motor controllers

Genie error code 0x2211 — HPD Sequencing

Message on the display: HPD Sequencing

Code 0x2211 occurs in machines: Genie S-85 XC FE, S-85 XC E, Z-60 DC, S-60 DC.

warning / function limited

Flash pattern 4-7 (flash code 0x47).

Description from the Genie service manual, in the original wording.

Effect on the machine: ShutdownThrottle

Possible causes

  • Incorrect sequence in application of Keyswitch, Interlock, Direction, or Throttle.
  • Faulty wiring, crimps, or switches at KSI, Interlock, Direction, or Throttle.
  • Moisture in above-noted digital input switches causing invalid (real) On/Off state. Verify input switch status. See Programmer » System Monitor menu » Inputs » Switch Status. Verify Throttle. See Programmer » System Monitor menu » Inputs » Throttle Command.

What you can do

Switch the machine off with the emergency stop and switch it on again. If the code comes back, do not use the machine and call service.

Solution from the manual

Set: HPD (High Pedal Disable) or SRO (Static Return to Off) sequencing fault caused by incorrect sequence of KSI, interlock, direction, and throttle inputs. Clear: Reapply inputs in correct sequence.

Source: Genie Service and Repair Manuals (Part No. 1337498, 1307785, 1299608), drive controller code table.

The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.

Does code 0x2211 not go away?

RK Rental services Genie lifts at our workshop or on site at the customer's premises (construction site, factory, warehouse). We read the code, remove the cause and select the parts by serial number.

Book a service

Genie service · Genie parts · All Genie codes of this system

Neighbouring Genie codes