Genie S-85 XC FE and S-85 XC E (hybrid and electric drive)
Genie error code 252-13 — Battery Management System (BMS) — No Response
Message on the display: Battery Management System (BMS) — No Response
Code 252-13 occurs in machines: Genie S-85 XC FE, S-85 XC E.
blocking fault
The Genie display shows code 252-13 with the message “Battery Management System (BMS) — No Response”. It is a blocking fault or a safety-related code: do not use the machine until the cause has been found and removed.
Effect on the machine: Battery Pack Contactor Opens Functions limited to AUX battery at slower speed
Possible causes
- CAN wiring Issue BMS Not Powered Up
What you can do
Switch the machine off with the emergency stop and switch it on again. If the code comes back, do not use the machine and call service.
Solution from the manual
*Confirm 60Ω across CAN pins 11 and 12 of BMS Plug when system power is OFF. *Confirm CAN wiring *Confirm Key Switch Power on pin 6 of BMS plug (R244KSP BL/WH)
Source: Genie Service and Repair Manual S-85 XC FE / E (Part No. 1337498), Fault Codes section.
The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.
Does code 252-13 not go away?
RK Rental services Genie lifts at our workshop or on site at the customer's premises (construction site, factory, warehouse). We read the code, remove the cause and select the parts by serial number.
Genie service · Genie parts · All Genie codes of this system