Genie S-85 XC FE and S-85 XC E (hybrid and electric drive)
Genie error code 233-24 — Battery Temperature — Too Low
Message on the display: Battery Temperature — Too Low
Code 233-24 occurs in machines: Genie S-85 XC FE, S-85 XC E.
blocking fault
The Genie display shows code 233-24 with the message “Battery Temperature — Too Low”. It is a blocking fault or a safety-related code: do not use the machine until the cause has been found and removed.
Effect on the machine: Terminates Hybrid Charge Opens Battery Contactor if beyond warning level (if equipped)
Possible causes
- Reported by the BMS: Charge: <0C = fault Discharge: < -20 = warning, < -30C = fault
What you can do
Switch the machine off with the emergency stop and switch it on again. If the code comes back, do not use the machine and call service.
Solution from the manual
Repower with battery temperature issue corrected.
Source: Genie Service and Repair Manual S-85 XC FE / E (Part No. 1337498), Fault Codes section.
The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.
Does code 233-24 not go away?
RK Rental services Genie lifts at our workshop or on site at the customer's premises (construction site, factory, warehouse). We read the code, remove the cause and select the parts by serial number.
Genie service · Genie parts · All Genie codes of this system