Genie error codes

Genie DC and FE electric boom lifts (Z-60 DC, S-60 DC, Z-45 DC, Z-45 FE, Z-33/18 DC)

The code is made up of two numbers: the fault source and the fault type (e.g. 15-21), shown on the display of the machine's ground control box. Below are 408 codes with the original message from the manufacturer's manual and its description. They apply to these machines: Genie Z-60 DC, S-60 DC, Z-45 DC, Z-45 FE, Z-33/18 DC. Source: Genie Service and Repair Manuals (Part No. 1307785, 1299608, 1297714, 1271125, 1268514), Fault Codes section.

Brand

Machine type / control system

Error code

Showing the first 30: type more digits of the code.

The descriptions are quoted from the manufacturer's service documentation and are for guidance only. Clearing codes, calibrations and repairs are carried out by a qualified service technician according to the manual for the specific serial number. A machine with an active blocking code must not be used until the cause has been removed.

All Genie codes: the list

Code	Meaning	Type
15-21	Foot Switch — Fault	blocking fault
15-28	Foot Switch — Timeout	blocking fault
16-12	Speed Adjustment Dial — VALUE TO HIGH	warning / function limited
16-27	Speed Adjustmen T Toggle Switch — Active at startup	warning / function limited
17-25	AUX PUMP _ Auxiliary Pump — RESISTANCE TOO HIGH	blocking fault
17-26	AUX PUMP _ Auxiliary Pump — RESISTANCE TOO LOW	blocking fault
18-12	Proportional Relief Valve — VALUE TOO HIGH	warning / function limited
18-16	Proportional Relief Valve — VALUE AT 0V	blocking fault
18-21	Proportion Al Relief Valve — Fault	warning / function limited
19-27	Aux Pump Toggle Switch — Active at startup	blocking fault
20-11	Primary Extend/Retract Joystick Rocker — Shorted to supply	blocking fault
20-16	Primary Extend/Retract Joystick Rocker — Sensor at Zero	blocking fault
20-17	Primary Extend/Retract Joystick Rocker — Not calibrated	blocking fault
21-11	Primary Up/Down Joystick — Shorted to Supply	blocking fault
21-16	Primary Up/Down Joystick — Value at 0 V	blocking fault
21-17	Primary Up/Down Joystick — Not Calibrate d	blocking fault
22-25	Primary Up Valve — Value too high	blocking fault
22-26	Primary Up Valve — Value too low	blocking fault
23-25	Primary Down Valve — Value too high	blocking fault
23-26	Primary Down Valve — Value too low	blocking fault
24-11	Primary Boom Angle Sensor — Shorted to Supply	blocking fault
24-16	Primary Boom Angle Sensor — Value at 0 V	blocking fault
24-17	Primary Boom Angle Sensor — Not Calibrated	blocking fault
24-19	Primary Boom Angle Sensor — Out of Range	blocking fault
26-25	Primary Extend Valve — Value too high	blocking fault
26-26	Primary Extend Valve — Value too low	blocking fault
27-25	Primary Retract Valve — Value too high	blocking fault
27-26	Primary Retract Valve — Value too low	blocking fault
31-11	Secondary Up/Down Joystick — Shorted to Supply	blocking fault
31-16	Secondary Up/Down Joystick — Value at 0 V	blocking fault
31-17	Secondary Up/Down Joystick — Not Calibrated	blocking fault
32-25	Secondary Up Valve — Value too high	blocking fault
32-26	Secondary Up Valve — Value too low	blocking fault
33-25	Secondary Down Valve — Value too high	blocking fault
33-26	Secondary Down Valve — Value too low	blocking fault
36-25	Jib Up/Platform Rotate Left Valve — Value too high	blocking fault
36-26	Jib Up/Platform Rotate Left Valve — Value too low	blocking fault
37-25	Jib Down/Platfor M Rotate Right Valve — Value too high	blocking fault
37-26	Jib Down/Platfor M Rotate Right Valve — Value too low	blocking fault
40-25	Jib Select Valve — Value too high	blocking fault
40-26	Jib Select Valve — Value too low	blocking fault
41-11	Turntable Joystick — Shorted to Supply	blocking fault
41-16	Turntable Joystick — Value at 0 V	blocking fault
41-17	Turntable Joystick — Not Calibrated	blocking fault
42-25	Turntable Cw Valve — Value too high	blocking fault
42-26	Turntable Cw Valve — Value too low	blocking fault
43-25	Turntable Ccw Valve — Value too high	blocking fault
43-26	Turntable Ccw Valve — Value too low	blocking fault
44-27	Drive Enable Toggle Switch — Active at startup	blocking fault
48-25	Small Pump Enable Valve — Value too high	blocking fault
48-26	Small Pump Enable Valve — Value too low	blocking fault
49-25	Large Pump Enable Valve — Value too high	blocking fault
49-26	Large Pump Enable Valve — Value too low	blocking fault
51-11	Drive Joystick — Shorted to Supply	blocking fault
51-16	Drive Joystick — Value at 0 V	blocking fault
51-17	Drive Joystick — Not Calibrated	blocking fault
56-13	Telematics Device — Not Detected	warning / function limited
59-0	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — No Response	blocking fault
59-12	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Controller Overcurrent	blocking fault
59-13	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Current Sensor Fault	blocking fault
59-14	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Precharge Failed	blocking fault
59-15	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Controller Severe Undertemp	blocking fault
59-16	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Controller Severe Overtemp	blocking fault
59-17	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Severe B+ Undervoltage	warning / function limited
59-18	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Severe B+ Overvoltage	blocking fault
59-22	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Controller Overtemp Cutback	warning / function limited
59-23	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — B+ Undervoltage Cutback	warning / function limited
59-24	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — B+ Overvoltage Cutback	warning / function limited
59-25	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — +5V Supply Failure	warning / function limited
59-26	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Digital Out 6 Overcurrent	warning / function limited
59-27	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Digital Out 7 Overcurrent	warning / function limited
59-28	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Motor Temp Hot Cutback	warning / function limited
59-29	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Motor Temp Sensor Fault	warning / function limited
59-31	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Coil1 Driver Open Short	warning / function limited
59-32	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Coil2 Driver Open/Short	warning / function limited
59-33	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Coil3Driver Open/Short	warning / function limited
59-34	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — Coil4Driver Open/Short	warning / function limited
59-35	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same fault codes — PD Open/Short	warning / function limited
59-36	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Encoder Fault	warning / function limited
59-37	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Motor Open	blocking fault
59-38	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Main Contactor Welded	blocking fault
59-39	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Main Contactor Did Not Close	blocking fault
59-46	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — EEPROM Failure	blocking fault
59-47	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — HPD/Sequencing Fault	warning / function limited
59-49	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Parameter Change Fault	blocking fault
59-68	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — VCL Runtime Error	blocking fault
59-69	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — External Supply Out of Range	warning / function limited
59-71	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — OS General	blocking fault
59-72	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — PDO Timeout	warning / function limited
59-73	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Stall Detected	warning / function limited
59-77	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Supervisor Fault	blocking fault
59-78	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Supervisor Incompatible	blocking fault
59-82	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Bad Calibrations	blocking fault
59-83	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Driver Supply Fault	blocking fault
59-84	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Following Error Fault	blocking fault
59-87	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Motor Characterization Fault	blocking fault
59-88	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Encoder Steps Count Fault	blocking fault
59-89	Right Rear Drive Controller Note: Left Rear, Left Front, Right Front, Drive [DCON], and Pump [ECON] motor controllers all have the same error type fault codes — Motor Type Fault	blocking fault
61-11	Steer Joystick — Shorted to Supply	blocking fault
61-16	Steer Joystick — Value at 0 V	blocking fault
61-17	Steer Joystick — Not Calibrated	blocking fault
63-11	Steer Angle Sensor — Shorted to Supply	warning / function limited
63-16	Steer Angle Sensor — Value at 0 V	warning / function limited
63-17	Steer Angle Sensor — Not Calibrated	warning / function limited
64-11	Hydraulic Pressure Sensor — Shorted to Supply	warning / function limited
64-16	Hydraulic Pressure Sensor — Value at 0 V	warning / function limited
64-17	Hydraulic Pressure Sensor — Not Calibrated	warning / function limited
66-11	Secondary Boom Angle Sensor — Shorted to Supply	warning / function limited
66-16	Secondary Boom Angle Sensor — Value at 0 V	warning / function limited
66-17	Secondary Boom Angle Sensor — Not Calibrated	warning / function limited
66-19	Secondary Boom Angle Sensor — Out of Range	warning / function limited
68-27	FUNCTION ENABLE TOGGLE SWITCH (Ground controls) — Active at startup	blocking fault
70-19	Engine/Pump Electric Motor Speed Mismatch — Out of Range	warning / function limited
70-24	Pump Electric Motor Speed — TOO LOW	blocking fault
71-21	Estop Relay — Fault	blocking fault
72-14	Lift Guard Contact Alarm Switch — Cross check fault	blocking fault
72-21	Lift Guard Contact Alarm Switch — Generic Fault	warning / function limited
76-12	Load Sense — Overload	blocking fault
76-13	Platform Load — No Response	blocking fault
76-14	Platform Load — Cross check fault	blocking fault
76-15	Platform Load — Value too low	blocking fault
76-17	Platform Load — Not Calibrated	blocking fault
76-21	Platform Load — Internal Fault	blocking fault
76-23	Platform Load — Value too high	blocking fault
76-31	Platform Load — Invalid setup	blocking fault
76-36	Load Sense — Invalid Calibration (crosscheck error)	blocking fault
77-13	VCON LCD DISPLAY (Platform controls) — No Response	blocking fault
78-13	PCON CONTROLLER (Platform controls) — No Response	blocking fault
78-29	PCON CONTROLLER (Platform controls) — Software Version Mismatch	blocking fault
79-13	ROUND LCD DISPLAY (Ground controls) — No Response	warning / function limited
80-0	Wall Powered Charger Fault Codes — No Response	warning / function limited
80-1	Wall Powered Charger Fault Codes — DC-DC failure: LLC excessive leakage fault	blocking fault
80-2	Wall Powered Charger Fault Codes — PFC failure: PFC excessive leakage fault	blocking fault
80-3	Wall Powered Charger Fault Codes — PFC has taken too long to boost	blocking fault
80-4	Wall Powered Charger Fault Codes — The charger has been unable to calibrate the current offset.	blocking fault
80-5	Wall Powered Charger Fault Codes — The output relay voltage too high when relay is closed.	blocking fault
81-1	Wall Powered Charger Error Codes — High battery voltage error	warning / function limited
81-2	Wall Powered Charger Error Codes — Low battery voltage error detected prior to starting a charge cycle	warning / function limited
81-3	Wall Powered Charger Error Codes — Charge timeout	warning / function limited
81-4	Wall Powered Charger Error Codes — Battery defective	blocking fault
81-7	Wall Powered Charger Error Codes — Ah Limit Exceeded	warning / function limited
81-8	Wall Powered Charger Error Codes — Battery temperature out of range error	warning / function limited
81-11	Wall Powered Charger Error Codes — Charger is disabled by external command	warning / function limited
81-12	Wall Powered Charger Error Codes — Reverse polarity error	blocking fault
81-13	Wall Powered Charger Error Codes — Battery does not take current	warning / function limited
81-16	Wall Powered Charger Error Codes — Software upgrade failure	warning / function limited
81-17	Wall Powered Charger Error Codes — USB error	warning / function limited
81-18	Wall Powered Charger Error Codes — Slot CRC error	warning / function limited
81-19	Wall Powered Charger Error Codes — Hardware build does not support software version	message
81-20	Wall Powered Charger Error Codes — No active algorithm selected	warning / function limited
81-21	Wall Powered Charger Error Codes — High battery voltage error detected while charging	warning / function limited
81-22	Wall Powered Charger Error Codes — Low battery voltage error detected while charging	warning / function limited
81-23	Wall Powered Charger Error Codes — High AC voltage error (>270VAC)	warning / function limited
81-24	Wall Powered Charger Error Codes — Failure to initialize	warning / function limited
81-25	Wall Powered Charger Error Codes — Low AC voltage oscillation error	warning / function limited
81-26	Wall Powered Charger Error Codes — Script Failure	warning / function limited
81-27	Wall Powered Charger Error Codes — USB overcurrent fault	warning / function limited
81-28	Wall Powered Charger Error Codes — Charge profile incompatibility	warning / function limited
81-29	Wall Powered Charger Error Codes — CAN Bus error	warning / function limited
81-30	Wall Powered Charger Error Codes — COMM battery module error	warning / function limited
81-31	Wall Powered Charger Error Codes — The Vref for the ADC measurements has triggered an alarm	warning / function limited
81-32	Wall Powered Charger Error Codes — CAN Bus heartbeat error	warning / function limited
81-36	Wall Powered Charger Error Codes — Battery Temperature Sensor Error	warning / function limited
81-37	Wall Powered Charger Error Codes — Stalled Cooling Fan Motor	warning / function limited
81-38	Wall Powered Charger Error Codes — CANOpen reprogramming failed	warning / function limited
82-21	Load Sense Recovery — Fault	blocking fault
83-20	Telematics Remote Shutdown — Warning	blocking fault
83-21	Telematics Remote Disable — Fault	blocking fault
84-13	Level Sensor — No Response	blocking fault
84-17	Level Sensor — Not Calibrated	blocking fault
84-21	Level Sensor — Fault	blocking fault
89-11	Fuel Level Sensor — Shorted to Supply	message
89-12	Fuel Level Sensor — Value too high	message
89-16	Fuel Level Sensor — Value at 0 V	message
95-23	Engine Rpm — Value too high	warning / function limited
95-24	Engine Rpm — Value too low	warning / function limited
96-19	Low Oil Pressure Or Engine Overtemp — Value out of range	blocking fault
97-21	Motor Braking Fault — Fault	blocking fault
100-16	Platform Level Up/Down Valve — Shorted to B-	blocking fault
100-21	Platform Level Up Valve — Fault	blocking fault
100-25	Platform Level Up Valve — Value too high	blocking fault
100-26	Platform Level Up Valve — Value too low	blocking fault
101-21	Platform Level Down Valve — Fault	blocking fault
101-25	Platform Level Down Valve — Value too high	blocking fault
101-26	Platform Level Down Valve — Value too low	blocking fault
104-11	Steer Angle Sensor — Shorted to Supply	warning / function limited
104-12	Steer Angle Sensor — VALUE TOO HIGH	warning / function limited
104-15	Steer Angle Sensor — VALUE TOO LOW	warning / function limited
104-16	Steer Angle Sensor — Value at 0 V	warning / function limited
104-17	Steer Angle Sensor — Not Calibrated	warning / function limited
131-23	Battery Voltage — Value too high	blocking fault
131-24	Battery Voltage — Value too low	blocking fault
135-0	Wall Powered Charger Fault Codes — No Response	warning / function limited
135-1	Wall Powered Charger Error Codes — High battery voltage error	warning / function limited
135-2	Wall Powered Charger Error Codes — Low battery voltage error detected prior to starting a charge cycle	warning / function limited
135-3	Wall Powered Charger Error Codes — Charge timeout	warning / function limited
135-4	Wall Powered Charger Error Codes — Battery defective	blocking fault
135-7	Wall Powered Charger Error Codes — Ah Limit Exceeded	warning / function limited
135-08	Wall Powered Charger — Component fault	warning / function limited
135-8	Wall Powered Charger Error Codes — Battery temperature out of range error	warning / function limited
135-11	Wall Powered Charger Error Codes — Charger is disabled by external command	warning / function limited
135-12	Wall Powered Charger Error Codes — Reverse polarity error	blocking fault
135-13	Wall Powered Charger — No Response (detected by TCON, not reported by charger)	warning / function limited
135-16	Wall Powered Charger Error Codes — Software upgrade failure	warning / function limited
135-17	Wall Powered Charger Error Codes — USB error	warning / function limited
135-18	Wall Powered Charger Error Codes — Slot CRC error	warning / function limited
135-19	Wall Powered Charger Error Codes — Hardware build does not support software version	message
135-20	Wall Powered Charger Error Codes — No active algorithm selected	warning / function limited
135-21	Wall Powered Charger Error Codes — High battery voltage error detected while charging	warning / function limited
135-22	Wall Powered Charger Error Codes — Low battery voltage error detected while charging	warning / function limited
135-23	Wall Powered Charger Error Codes — High AC voltage error (>270VAC)	warning / function limited
135-24	Wall Powered Charger Error Codes — Failure to initialize	warning / function limited
135-25	Wall Powered Charger Error Codes — Low AC voltage oscillation error	warning / function limited
135-26	Wall Powered Charger Error Codes — Script Failure	warning / function limited
135-27	Wall Powered Charger Error Codes — USB overcurrent fault	warning / function limited
135-28	Wall Powered Charger — Charger timeout	warning / function limited
135-29	Wall Powered Charger — Software version mismatch	warning / function limited
135-30	Wall Powered Charger Error Codes — COMM battery module error	warning / function limited
135-31	Wall Powered Charger Error Codes — The Vref for the ADC measurements has I triggered an alarm	warning / function limited
135-32	Wall Powered Charger Error Codes — CAN Bus heartbeat error	warning / function limited
135-36	Wall Powered Charger Error Codes — r Battery Temperature ( Sensor Error	warning / function limited
135-37	Wall Powered Charger Error Codes — Stalled Cooling Fan Motor l	warning / function limited
135-38	Wall Powered Charger Error Codes — CANOpen reprogramming failed	warning / function limited
135-51	Wall Powered Charger Fault Codes — DC-DC failure: LLC excessive leakage fault	blocking fault
135-52	Wall Powered Charger Fault Codes — PFC failure: PFC excessive leakage fault	blocking fault
135-53	Wall Powered Charger Fault Codes — PFC has taken too long to boost	blocking fault
135-54	Wall Powered Charger Fault Codes — The charger has been unable to calibrate the current offset.	blocking fault
135-55	Wall Powered Charger Fault Codes — The output relay voltage too high when relay is closed.	blocking fault
136-0	Pump [ECON] — No Response	blocking fault
136-08	Pump / Generator Motor Controller — Component fault	warning / function limited
136-12	Pump [ECON] — Controller Overcurrent	blocking fault
136-13	Pump / Generator Motor Controller — No Response	blocking fault
136-14	Pump [ECON] — Precharge Failed	blocking fault
136-15	Pump [ECON] — Controller Severe Undertemp	blocking fault
136-16	Pump [ECON] — Controller Severe Overtemp	blocking fault
136-17	Pump [ECON] — Severe B+ Undervoltage	warning / function limited
136-18	Pump [ECON] — Severe B+ Overvoltage	blocking fault
136-22	Pump [ECON] — Controller Overtemp Cutback	warning / function limited
136-23	Pump [ECON] — B+ Undervoltage Cutback	warning / function limited
136-24	Pump [ECON] — B+ Overvoltage Cutback	warning / function limited
136-25	Pump [ECON] — +5V Supply Failure	warning / function limited
136-26	Pump [ECON] — Digital Out 6 Overcurrent	warning / function limited
136-27	Pump [ECON] — Digital Out 7 Overcurrent	warning / function limited
136-28	Pump [ECON] — Motor Temp Hot Cutback	warning / function limited
136-29	Pump [ECON] — Motor Temp Sensor Fault	warning / function limited
136-31	Pump [ECON] — Coil1 Driver Open Short	warning / function limited
136-32	Pump [ECON] — Coil2 Driver Open/Short	warning / function limited
136-33	Pump [ECON] — Coil3Driver Open/Short	warning / function limited
136-34	Pump [ECON] — Coil4Driver Open/Short	warning / function limited
136-35	Pump [ECON] — PD Open/Short	warning / function limited
136-36	Pump [ECON] — Encoder Fault	warning / function limited
136-37	Pump [ECON] — Motor Open	blocking fault
136-38	Pump [ECON] — Main Contactor Welded	blocking fault
136-39	Pump [ECON] — Main Contactor Did Not Clo	blocking fault
136-46	Pump [ECON] — EEPROM Failure	blocking fault
136-47	Pump [ECON] — HPD/Sequencing Fault	warning / function limited
136-49	Pump [ECON] — Parameter Change Fault	blocking fault
136-68	Pump [ECON] — VCL Runtime Error	blocking fault
136-69	Pump [ECON] — External Supply Out of Ran	warning / function limited
136-71	Pump [ECON] — OS General	blocking fault
136-72	Pump [ECON] — PDO Timeout	warning / function limited
136-73	Pump [ECON] — Stall Detected	warning / function limited
136-77	Pump [ECON] — Supervisor Fault	blocking fault
136-78	Pump [ECON] — Supervisor Incompatible	blocking fault
136-82	Pump [ECON] — Bad Calibrations	blocking fault
136-83	Pump [ECON] — Driver Supply Fault	blocking fault
136-84	Pump [ECON] — Following Error Fault	blocking fault
136-87	Pump [ECON] — Motor Characterization Fau	blocking fault
136-88	Pump [ECON] — Encoder Steps Count Fault	blocking fault
136-89	Pump [ECON] — Motor Type Fault	blocking fault
136-91	Pump [ECON] — Motor Type Fault	blocking fault
136-92	Pump [ECON] — EM Brake Failed to Set	blocking fault
136-93	Pump [ECON] — Encoder LOS	warning / function limited
136-98	Pump [ECON] — Illegal Model Number	blocking fault
136-99	Pump [ECON] — Parameter Change Fault	blocking fault
137-0	Left Front Drive Controller — No Response	blocking fault
137-08	Left Front Motor Controller — Component fault	blocking fault
137-13	Left Front Motor Controller — No Response	blocking fault
138-0	Right Front Drive Controller — No Response	blocking fault
138-08	Right Front Motor Controller — Component fault	blocking fault
138-13	Right Front Motor Controller — No Response	blocking fault
139-0	Left Rear Drive Controller — No Response	blocking fault
139-08	Left Rear Motor Controller — Component fault	blocking fault
139-13	Left Rear Motor Controller — No Response	blocking fault
139-21	Left Rear Drive Controller — Fault	blocking fault
140-0	Pump & Drive Controllers — No Response	blocking fault
140-08	Right Rear Motor Controller — Component fault	blocking fault
140-12	Pump & Drive Controllers — Controller Overcurrent	blocking fault
140-13	Right Rear Motor Controller — No Response	blocking fault
140-14	Pump & Drive Controllers — Precharge Failed	blocking fault
140-15	Pump & Drive Controllers — Controller Severe Undertemp	blocking fault
140-16	Pump & Drive Controllers — Controller Severe Overtemp	blocking fault
140-17	Pump & Drive Controllers — Severe B+ Undervoltage	warning / function limited
140-18	Pump & Drive Controllers — Severe B+ Overvoltage	blocking fault
140-21	Right Front Drive Controller — Fault	blocking fault
140-22	Pump & Drive Controllers — Controller Overtemp Cutback	warning / function limited
140-23	Pump & Drive Controllers — B+ Undervoltage Cutback	warning / function limited
140-25	Pump & Drive Controllers — '+5V Supply Failure	warning / function limited
140-26	Pump & Drive Controllers — Digital Out 6 Open/Short	blocking fault
140-27	Pump & Drive Controllers — Digital Out 7 Open/Short	blocking fault
140-28	Pump & Drive Controllers — Motor Temp Hot Cutback	warning / function limited
140-29	Pump & Drive Controllers — Motor Temp Sensor Fault	warning / function limited
140-31	Pump & Drive Controllers — Main Open/Short (RRDCON & ECON only)	blocking fault
140-32	Pump & Drive Controllers — EMBrake Open/Short (DCON Only)	blocking fault
140-33	Pump & Drive Controllers — Coil3 Driver Open/Short	blocking fault
140-34	Pump & Drive Controllers — Coil4 Driver Open/Short	blocking fault
140-35	Pump & Drive Controllers — PD Open/Short	blocking fault
140-36	Pump & Drive Controllers — Encoder Fault	blocking fault
140-37	Pump & Drive Controllers — Motor Open	blocking fault
140-38	Pump & Drive Controllers — Main Contactor Welded (RRDCON & ECON only)	blocking fault
140-39	Pump & Drive Controllers — Main Contactor Did Not Close (RRDCON & ECON only)	blocking fault
140-46	Pump & Drive Controllers — EEPROM Failure	blocking fault
140-49	Pump & Drive Controllers — Parameter Change Fault	blocking fault
140-68	Pump & Drive Controllers — VCL Runtime Error	blocking fault
140-71	Pump & Drive Controllers — OS General	blocking fault
140-72	Pump & Drive Controllers — PDO Timeout	blocking fault
140-73	Pump & Drive Controllers — Stall Detected	blocking fault
140-77	Pump & Drive Controllers — Supervisor Fault	blocking fault
140-78	Pump & Drive Controllers — Supervisor Incompatible	blocking fault
140-82	Pump & Drive Controllers — Bad Calibrations	blocking fault
140-83	Pump & Drive Controllers — Driver Supply Fault	blocking fault
140-84	Pump & Drive Controllers — Following Error Fault	blocking fault
140-88	Pump & Drive Controllers — Encoder Pulse Count Fault	blocking fault
140-89	Pump & Drive Controllers — Motor Type Fault	blocking fault
140-91	Pump & Drive Controllers — VCL/OS Mismatch	blocking fault
140-92	Pump & Drive Controllers — EM Brake Failed to Set	blocking fault
140-98	Pump & Drive Controllers — Illegal Model Number	blocking fault
140-99	Pump & Drive Controllers — Parameter Mismatch	blocking fault
160-21	Steer Left Valve — Fault	blocking fault
161-21	Steer Right Valve — Fault	blocking fault
189-21	Lift Pump Motor — Fault	blocking fault
189-25	Lift Pump Motor — Value too high	blocking fault
189-26	Lift Pump Motor — RESISTANCT TOO LOW	blocking fault
190-12	AC R MOTOR _ _ AC Motor Right Side — VALUE TOO HIGH	blocking fault
190-15	AC R MOTOR _ _ AC Motor Right Side — VALUE TOO LOW	blocking fault
190-21	Right Rear Drive Motor — Fault	blocking fault
190-25	Right Rear Drive Motor — Value too high	blocking fault
191-12	AC L MOTOR _ _ AC Motor Left Side — VALUE TOO HIGH	blocking fault
191-15	AC L MOTOR _ _ AC Motor Left Side — VALUE TOO LOW	blocking fault
191-21	Left Rear Drive Motor — Fault	blocking fault
191-25	Left Rear Drive Motor — Value too high	blocking fault
192-21	Right Front Drive Motor — Fault	blocking fault
192-25	Right Front Drive Motor — Value too high	blocking fault
193-21	Left Front Drive Motor — Fault	blocking fault
193-25	Left Front Drive Motor — Value too high	blocking fault
194-21	Right Rear Brake Coil — Fault	blocking fault
194-26	BRAKE RIGHT _ Brake AC Motor Right Side — VALUE TOO LOW	blocking fault
195-21	Left Rear Brake Coil — Fault	blocking fault
195-26	BRAKE LEFT _ Brake AC Motor Left Side — VALUE TOO LOW	blocking fault
196-21	Right Front Brake Coil — Fault	blocking fault
197-21	Left Front Brake Coil — Fault	blocking fault
198-21	Right Rear Speed Sensor — Fault	blocking fault
199-21	Left Rear Speed Sensor — Fault	blocking fault
200-21	Right Front Speed Sensor — Fault	blocking fault
201-21	Left Front Speed Sensor — Fault	blocking fault
202-9	AC R CTRLR _ _ AC Motor Controller Right Side — SHORTED TO B-	blocking fault
202-26	AC R CTRLR _ _ AC Motor Controller Right Side — RESISTANCE TOO LOW	blocking fault
203-9	AC L CTRLR _ _ AC Motor Controller Left Side — SHORTED TO B-	blocking fault
203-26	AC L CTRLR _ _ AC Motor Controller Left Side — RESISTANCE TOO LOW	blocking fault
204-19	BATTERY _ PWR Battery Power Notes: AUX is available Drive is locked out — OUT OF RANGE	blocking fault
204-21	Main Battery (Charger) — Fault	blocking fault
204-23	Main Battery Power Pack Voltage — Value too high	warning / function limited
204-24	Main Battery Power Pack Voltage — Value too low	warning / function limited
205-12	Drive Power Contactor — VALUE TOO HIGH	blocking fault
205-13	Drive Power Contactor — VALUE TOO LOW	blocking fault
205-21	Drive Power Contactor — Fault	blocking fault
205-26	Drive Power Contactor — VALUE TOO LOW	blocking fault
205-27	Drive Power Contactor — Active at startup	blocking fault
233-19	Battery Temperature (Charger) — Out of Range	blocking fault
233-21	Battery Temperature (Charger) — Fault	blocking fault
233-23	Battery Temperature (Charger) — Value too high	blocking fault
253-21	Capacitor Charge — Fault	blocking fault
254-23	Battery Charge Voltage — Value too high	warning / function limited
254-24	Battery Charge Voltage — Value too low	warning / function limited
255-20	Right Rear Drive Motor Temperature — Warning	warning / function limited
255-21	Right Rear Drive Motor Temperature — Fault	blocking fault
256-20	Left Rear Drive Motor Temperature — Warning	warning / function limited
256-21	Left Rear Drive Motor Temperature — Fault	blocking fault
257-20	Right Front Drive Motor Temperature — Warning	warning / function limited
257-21	Right Front Drive Motor Temperature — Fault	blocking fault
258-20	Left Front Drive Motor Temperature — Warning	warning / function limited
258-21	Left Front Drive Motor Temperature — Fault	blocking fault
259-20	Right Rear Drive Controller Temperature — Warning	warning / function limited
259-23	Right Rear Drive Controller Temperature — Value too high	blocking fault
259-24	Right Rear Drive Controller Temperature — Value too low	blocking fault
260-20	Left Rear Drive Controller Temperature — Warning	warning / function limited
260-23	Left Rear Drive Controller Temperature — Value too high	blocking fault
260-24	Left Rear Drive Controller Temperature — Value too low	blocking fault
261-20	Right Front Drive Controller Temperature — Warning	warning / function limited
261-23	Right Front Drive Controller Temperature — Value too high	blocking fault
261-24	Right Front Drive Controller Temperature — Value too low	blocking fault
262-20	Left Front Drive Controller Temperature — Warning	warning / function limited
262-23	Left Front Drive Controller Temperature — Value too high	blocking fault
262-24	Left Front Drive Controller Temperature — Value too low	blocking fault
264-23	Amp Hour Return — Value too high	warning / function limited
265-21	Charger Usb — Fault	warning / function limited
266-21	Charge Profile — Fault	blocking fault
266-31	Charge Profile — Invalid setup	blocking fault
267-23	Charger Ac Voltage — Value too high	blocking fault
267-24	Charger Ac Voltage — Value too low	blocking fault
268-21	Charger Cooling Fan — Fault	warning / function limited
270-21	Pump Power Contactor — Fault	blocking fault
270-27	Pump Power Contactor — Active at startup	blocking fault
271-21	Pump Motor Temperature — Fault	blocking fault
271-23	Pump Motor Temperature — Value too high	warning / function limited
272-23	Pump Controller Temperature — Value too high	blocking fault
272-24	Pump Controller Temperature — Value too low	blocking fault
273-21	Lift Pump Motor Speed Sensor — Fault	blocking fault